Elastic plastic contact Under Normal and Tangential Loading - A Model for an Adhesive Wear Particle at a Spherical Contact
5 Angebote vergleichen
Preise | 2013 | 2014 | 2015 | 2017 |
---|---|---|---|---|
Schnitt | € 54,18 | € 46,49 | € 45,65 | € 74,96 |
Nachfrage |
1
Elastic plastic contact Under Normal and Tangential Loading (2009)
DE PB NW
ISBN: 9783639144680 bzw. 3639144686, in Deutsch, VDM, Taschenbuch, neu.
Lieferung aus: Schweiz, Versandfertig innert 6 - 9 Tagen.
A Model for an Adhesive Wear Particle at a Spherical Contact, Wear is a very common problem between containing surfaces under combined normal and tangential loads. The main goal of the current study is a numerical prediction of adhesive wear evolution in a spherical contact. The contact consists of a deformable sphere and a rigid flat subjected to combined normal and tangential loading under full stick contact condition. Following the completion of the normal loading a tangential load is applied gradually until the contact fails and large tangential deflection of the flat takes place indicating sliding inception. Due to the full stick contact condition the sliding can occur at a certain interface beneath the contact where all the material points experience a certain maximum shear strain. The volume contained between this interface and the rigid flat forms a potential wear particle that would adhere to the moving flat and result in material transfer. Given the material property of the contacting surfaces with stick condition the wear coefficient could be calculated. Hence the potential dimensionless wear volume could also be calculated with no need for any further experimental data. Taschenbuch, 01.07.2009.
A Model for an Adhesive Wear Particle at a Spherical Contact, Wear is a very common problem between containing surfaces under combined normal and tangential loads. The main goal of the current study is a numerical prediction of adhesive wear evolution in a spherical contact. The contact consists of a deformable sphere and a rigid flat subjected to combined normal and tangential loading under full stick contact condition. Following the completion of the normal loading a tangential load is applied gradually until the contact fails and large tangential deflection of the flat takes place indicating sliding inception. Due to the full stick contact condition the sliding can occur at a certain interface beneath the contact where all the material points experience a certain maximum shear strain. The volume contained between this interface and the rigid flat forms a potential wear particle that would adhere to the moving flat and result in material transfer. Given the material property of the contacting surfaces with stick condition the wear coefficient could be calculated. Hence the potential dimensionless wear volume could also be calculated with no need for any further experimental data. Taschenbuch, 01.07.2009.
2
Elastic plastic contact Under Normal and Tangential Loading: A Model for an Adhesive Wear Particle at a Spherical Contact (2009)
EN PB US
ISBN: 9783639144680 bzw. 3639144686, in Englisch, 68 Seiten, VDM Verlag, Taschenbuch, gebraucht.
Neuf à partir de: $54.75 (5 Offre)
Utilisé à partir de: $455.82 (1 Offre)
Voir la plus 6 Offres à Amazon.com
Lieferung aus: Vereinigte Staaten von Amerika, Usually ships in 1-2 business days.
Von Händler/Antiquariat, Red Rhino.
Wear is a very common problem between containing surfaces under combined normal and tangential loads. The main goal of the current study is a numerical prediction of adhesive wear evolution in a spherical contact. The contact consists of a deformable sphere and a rigid flat subjected to combined normal and tangential loading under full stick contact condition. Following the completion of the normal loading a tangential load is applied gradually until the contact fails and large tangential deflection of the flat takes place indicating sliding inception. Due to the full stick contact condition the sliding can occur at a certain interface beneath the contact where all the material points experience a certain maximum shear strain. The volume contained between this interface and the rigid flat forms a potential wear particle that would adhere to the moving flat and result in material transfer. Given the material property of the contacting surfaces with stick condition the wear coefficient could be calculated. Hence the potential dimensionless wear volume could also be calculated with no need for any further experimental data. Paperback, Étiquette: VDM Verlag, VDM Verlag, Groupe de produits: Book, Publié: 2009-06-26, Studio: VDM Verlag, Vente de rang: 9354293.
Von Händler/Antiquariat, Red Rhino.
Wear is a very common problem between containing surfaces under combined normal and tangential loads. The main goal of the current study is a numerical prediction of adhesive wear evolution in a spherical contact. The contact consists of a deformable sphere and a rigid flat subjected to combined normal and tangential loading under full stick contact condition. Following the completion of the normal loading a tangential load is applied gradually until the contact fails and large tangential deflection of the flat takes place indicating sliding inception. Due to the full stick contact condition the sliding can occur at a certain interface beneath the contact where all the material points experience a certain maximum shear strain. The volume contained between this interface and the rigid flat forms a potential wear particle that would adhere to the moving flat and result in material transfer. Given the material property of the contacting surfaces with stick condition the wear coefficient could be calculated. Hence the potential dimensionless wear volume could also be calculated with no need for any further experimental data. Paperback, Étiquette: VDM Verlag, VDM Verlag, Groupe de produits: Book, Publié: 2009-06-26, Studio: VDM Verlag, Vente de rang: 9354293.
3
Elastic plastic contact Under Normal and Tangential Loading: A Model for an Adhesive Wear Particle at a Spherical Contact (2009)
EN PB NW
ISBN: 9783639144680 bzw. 3639144686, in Englisch, 68 Seiten, VDM Verlag, Taschenbuch, neu.
Neuf à partir de: $54.75 (5 Offre)
Utilisé à partir de: $455.82 (1 Offre)
Voir la plus 6 Offres à Amazon.com
Lieferung aus: Vereinigte Staaten von Amerika, Usually ships in 1-2 business days.
Von Händler/Antiquariat, Book Depository US.
Wear is a very common problem between containing surfaces under combined normal and tangential loads. The main goal of the current study is a numerical prediction of adhesive wear evolution in a spherical contact. The contact consists of a deformable sphere and a rigid flat subjected to combined normal and tangential loading under full stick contact condition. Following the completion of the normal loading a tangential load is applied gradually until the contact fails and large tangential deflection of the flat takes place indicating sliding inception. Due to the full stick contact condition the sliding can occur at a certain interface beneath the contact where all the material points experience a certain maximum shear strain. The volume contained between this interface and the rigid flat forms a potential wear particle that would adhere to the moving flat and result in material transfer. Given the material property of the contacting surfaces with stick condition the wear coefficient could be calculated. Hence the potential dimensionless wear volume could also be calculated with no need for any further experimental data. Paperback, Étiquette: VDM Verlag, VDM Verlag, Groupe de produits: Book, Publié: 2009-06-26, Studio: VDM Verlag, Vente de rang: 9354293.
Von Händler/Antiquariat, Book Depository US.
Wear is a very common problem between containing surfaces under combined normal and tangential loads. The main goal of the current study is a numerical prediction of adhesive wear evolution in a spherical contact. The contact consists of a deformable sphere and a rigid flat subjected to combined normal and tangential loading under full stick contact condition. Following the completion of the normal loading a tangential load is applied gradually until the contact fails and large tangential deflection of the flat takes place indicating sliding inception. Due to the full stick contact condition the sliding can occur at a certain interface beneath the contact where all the material points experience a certain maximum shear strain. The volume contained between this interface and the rigid flat forms a potential wear particle that would adhere to the moving flat and result in material transfer. Given the material property of the contacting surfaces with stick condition the wear coefficient could be calculated. Hence the potential dimensionless wear volume could also be calculated with no need for any further experimental data. Paperback, Étiquette: VDM Verlag, VDM Verlag, Groupe de produits: Book, Publié: 2009-06-26, Studio: VDM Verlag, Vente de rang: 9354293.
4
Elastic plastic contact Under Normal and Tangential Loading
DE PB NW
ISBN: 9783639144680 bzw. 3639144686, in Deutsch, VDM, Taschenbuch, neu.
Lieferung aus: Schweiz, 01.07.2009.
A Model for an Adhesive Wear Particle at a Spherical Contact, Wear is a very common problem between containing surfaces under combined normal and tangential loads. The main goal of the current study is a numerical prediction of adhesive wear evolution in a spherical contact. The contact consists of a deformable sphere and a rigid flat subjected to combined normal and tangential loading under full stick contact condition. Following the completion of the normal loading a tangential load is applied gradually until the contact fails and large tangential deflection of the flat takes place indicating sliding inception. Due to the full stick contact condition the sliding can occur at a certain interface beneath the contact where all the material points experience a certain maximum shear strain. The volume contained between this interface and the rigid flat forms a potential wear particle that would adhere to the moving flat and result in material transfer. Given the material property of the contacting surfaces with stick condition the wear coefficient could be calculated. Hence the potential dimensionless wear volume could also be calculated with no need for any further experimental data.
A Model for an Adhesive Wear Particle at a Spherical Contact, Wear is a very common problem between containing surfaces under combined normal and tangential loads. The main goal of the current study is a numerical prediction of adhesive wear evolution in a spherical contact. The contact consists of a deformable sphere and a rigid flat subjected to combined normal and tangential loading under full stick contact condition. Following the completion of the normal loading a tangential load is applied gradually until the contact fails and large tangential deflection of the flat takes place indicating sliding inception. Due to the full stick contact condition the sliding can occur at a certain interface beneath the contact where all the material points experience a certain maximum shear strain. The volume contained between this interface and the rigid flat forms a potential wear particle that would adhere to the moving flat and result in material transfer. Given the material property of the contacting surfaces with stick condition the wear coefficient could be calculated. Hence the potential dimensionless wear volume could also be calculated with no need for any further experimental data.
5
Elastic plastic contact Under Normal and Tangential Loading - A Model for an Adhesive Wear Particle at a Spherical Contact (2009)
DE PB NW
ISBN: 9783639144680 bzw. 3639144686, in Deutsch, 68 Seiten, VDM Verlag Dr. Müller, Taschenbuch, neu.
Lieferung aus: Deutschland, Livraison gratuite.
Von Händler/Antiquariat, Syndikat Buchdienst, [4235284].
Wear is a very common problem between containing surfaces under combined normal and tangential loads. The main goal of the current study is a numerical prediction of adhesive wear evolution in a spherical contact. The contact consists of a deformable sphere and a rigid flat subjected to combined normal and tangential loading under full stick contact condition. Following the completion of the normal loading a tangential load is applied gradually until the contact fails and large tangential deflection of the flat takes place indicating sliding inception. Due to the full stick contact condition the sliding can occur at a certain interface beneath the contact where all the material points experience a certain maximum shear strain. The volume contained between this interface and the rigid flat forms a potential wear particle that would adhere to the moving flat and result in material transfer. Given the material property of the contacting surfaces with stick condition the wear coefficient could be calculated. Hence the potential dimensionless wear volume could also be calculated with no need for any further experimental data. 2009, Taschenbuch / Paperback, Neuware, H: 220mm, B: 150mm, T: 3mm, 107g, 68, Internationaler Versand, Selbstabholung und Barzahlung, PayPal, offene Rechnung, Banküberweisung.
Von Händler/Antiquariat, Syndikat Buchdienst, [4235284].
Wear is a very common problem between containing surfaces under combined normal and tangential loads. The main goal of the current study is a numerical prediction of adhesive wear evolution in a spherical contact. The contact consists of a deformable sphere and a rigid flat subjected to combined normal and tangential loading under full stick contact condition. Following the completion of the normal loading a tangential load is applied gradually until the contact fails and large tangential deflection of the flat takes place indicating sliding inception. Due to the full stick contact condition the sliding can occur at a certain interface beneath the contact where all the material points experience a certain maximum shear strain. The volume contained between this interface and the rigid flat forms a potential wear particle that would adhere to the moving flat and result in material transfer. Given the material property of the contacting surfaces with stick condition the wear coefficient could be calculated. Hence the potential dimensionless wear volume could also be calculated with no need for any further experimental data. 2009, Taschenbuch / Paperback, Neuware, H: 220mm, B: 150mm, T: 3mm, 107g, 68, Internationaler Versand, Selbstabholung und Barzahlung, PayPal, offene Rechnung, Banküberweisung.
Lade…