Von dem Buch DC Motors haben wir 2 gleiche oder sehr ähnliche Ausgaben identifiziert!
Falls Sie nur an einem bestimmten Exempar interessiert sind, können Sie aus der folgenden Liste jenes wählen, an dem Sie interessiert sind:
100%: Goran Rafajlovski/ Mihail Digalovski: DC Motors (ISBN: 9783639862577) 2016, in Englisch, Taschenbuch.Nur diese Ausgabe anzeigen…
38%: Rafajlovski, Goran; Digalovski, Mihail: INDUCTION MOTORS Dynamics and Vector Control (ISBN: 9783639861655) 2015, in Deutsch, Taschenbuch.Nur diese Ausgabe anzeigen…
Alle lieferbaren Bücher - alle Angebote vergleichen
ISBN: 9783639862577
Bester Preis: € 23,01 (vom 23.10.2019)1
DC Motors
DE PB NWISBN: 9783639862577 bzw. 3639862570, in Deutsch, Scholar'S Press, Taschenbuch, neu.
Lieferung aus: Deutschland, Versandkostenfrei.
buecher.de GmbH & Co. KG, [1].
In this book design and synthesis of microprocessor controlled DC drive system in start-stop working mode is presented. The motor is fed from three - phase thyristor converter without circulating current. The design of position control is based on cascade principle with optimal speed control adjusted by means of modulus optimization method. Synthesis of the system is based on Z-transformation and bi-linear conform copying from Z-plane to W-plane of complex pseudo frequency. Velocity is measured with incremental encoder using M/T method. Software realization of digital speed and position controller is obtained, using direct realization of the recursive algorithm. The results of synthesis, using module and symmetrical optimization method are compared with the results obtained by simulation of the control system. The speed and position control are realized digitally by means of a microcomputer EPAC 68008, a real time operating system, RTOS, and the PEARL language.By directly implementing the recursive algorithm, a simple practical implementation of an adaptive PI-speed controller and PD-position controller is presented.2016. 88 S. 220 mmVersandfertig in 3-5 Tagen, Softcover.
buecher.de GmbH & Co. KG, [1].
In this book design and synthesis of microprocessor controlled DC drive system in start-stop working mode is presented. The motor is fed from three - phase thyristor converter without circulating current. The design of position control is based on cascade principle with optimal speed control adjusted by means of modulus optimization method. Synthesis of the system is based on Z-transformation and bi-linear conform copying from Z-plane to W-plane of complex pseudo frequency. Velocity is measured with incremental encoder using M/T method. Software realization of digital speed and position controller is obtained, using direct realization of the recursive algorithm. The results of synthesis, using module and symmetrical optimization method are compared with the results obtained by simulation of the control system. The speed and position control are realized digitally by means of a microcomputer EPAC 68008, a real time operating system, RTOS, and the PEARL language.By directly implementing the recursive algorithm, a simple practical implementation of an adaptive PI-speed controller and PD-position controller is presented.2016. 88 S. 220 mmVersandfertig in 3-5 Tagen, Softcover.
2
Symbolbild
DC Motors (2016)
DE PB NW RPISBN: 9783639862577 bzw. 3639862570, in Deutsch, SPS Feb 2016, Taschenbuch, neu, Nachdruck.
Lieferung aus: Deutschland, Versandkostenfrei.
Von Händler/Antiquariat, AHA-BUCH GmbH [51283250], Einbeck, Germany.
This item is printed on demand - Print on Demand Neuware - In this book design and synthesis of microprocessor controlled DC drive system in start-stop working mode is presented. The motor is fed from three - phase thyristor converter without circulating current. The design of position control is based on cascade principle with optimal speed control adjusted by means of modulus optimization method. Synthesis of the system is based on Z-transformation and bi-linear conform copying from Z-plane to W-plane of complex pseudo frequency. Velocity is measured with incremental encoder using M/T method. Software realization of digital speed and position controller is obtained, using direct realization of the recursive algorithm. The results of synthesis, using module and symmetrical optimization method are compared with the results obtained by simulation of the control system. The speed and position control are realized digitally by means of a microcomputer EPAC 68008, a real time operating system, RTOS, and the PEARL language.By directly implementing the recursive algorithm, a simple practical implementation of an adaptive PI-speed controller and PD-position controller is presented. 88 pp. Englisch.
Von Händler/Antiquariat, AHA-BUCH GmbH [51283250], Einbeck, Germany.
This item is printed on demand - Print on Demand Neuware - In this book design and synthesis of microprocessor controlled DC drive system in start-stop working mode is presented. The motor is fed from three - phase thyristor converter without circulating current. The design of position control is based on cascade principle with optimal speed control adjusted by means of modulus optimization method. Synthesis of the system is based on Z-transformation and bi-linear conform copying from Z-plane to W-plane of complex pseudo frequency. Velocity is measured with incremental encoder using M/T method. Software realization of digital speed and position controller is obtained, using direct realization of the recursive algorithm. The results of synthesis, using module and symmetrical optimization method are compared with the results obtained by simulation of the control system. The speed and position control are realized digitally by means of a microcomputer EPAC 68008, a real time operating system, RTOS, and the PEARL language.By directly implementing the recursive algorithm, a simple practical implementation of an adaptive PI-speed controller and PD-position controller is presented. 88 pp. Englisch.
3
DC Motors - Dynamics and Control
~EN PB NWISBN: 9783639862577 bzw. 3639862570, vermutlich in Englisch, SPS, Taschenbuch, neu.
Lieferung aus: Deutschland, Versandkostenfrei.
DC Motors: In this book design and synthesis of microprocessor controlled DC drive system in start-stop working mode is presented. The motor is fed from three - phase thyristor converter without circulating current. The design of position control is based on cascade principle with optimal speed control adjusted by means of modulus optimization method. Synthesis of the system is based on Z-transformation and bi-linear conform copying from Z-plane to W-plane of complex pseudo frequency. Velocity is measured with incremental encoder using M/T method. Software realization of digital speed and position controller is obtained, using direct realization of the recursive algorithm. The results of synthesis, using module and symmetrical optimization method are compared with the results obtained by simulation of the control system. The speed and position control are realized digitally by means of a microcomputer EPAC 68008, a real time operating system, RTOS, and the PEARL language.By directly implementing the recursive algorithm, a simple practical implementation of an adaptive PI-speed controller and PD-position controller is presented. Englisch, Taschenbuch.
DC Motors: In this book design and synthesis of microprocessor controlled DC drive system in start-stop working mode is presented. The motor is fed from three - phase thyristor converter without circulating current. The design of position control is based on cascade principle with optimal speed control adjusted by means of modulus optimization method. Synthesis of the system is based on Z-transformation and bi-linear conform copying from Z-plane to W-plane of complex pseudo frequency. Velocity is measured with incremental encoder using M/T method. Software realization of digital speed and position controller is obtained, using direct realization of the recursive algorithm. The results of synthesis, using module and symmetrical optimization method are compared with the results obtained by simulation of the control system. The speed and position control are realized digitally by means of a microcomputer EPAC 68008, a real time operating system, RTOS, and the PEARL language.By directly implementing the recursive algorithm, a simple practical implementation of an adaptive PI-speed controller and PD-position controller is presented. Englisch, Taschenbuch.
4
DC Motors
~EN NW ABISBN: 9783639862577 bzw. 3639862570, vermutlich in Englisch, VDM Verlag Dr. Müller, Saarbrücken, Deutschland, neu, Hörbuch.
Lieferung aus: Schweiz, Lieferzeit: 2 Tage, zzgl. Versandkosten.
In this book design and synthesis of microprocessor controlled DC drive system in start-stop working mode is presented. The motor is fed from three - phase thyristor converter without circulating current. The design of position control is based on cascade principle with optimal speed control adjusted by means of modulus optimization method. Synthesis of the system is based on Z-transformation and bi-linear conform copying from Z-plane to W-plane of complex pseudo frequency. Velocity is measured with incremental encoder using M/T method. Software realization of digital speed and position controller is obtained, using direct realization of the recursive algorithm. The results of synthesis, using module and symmetrical optimization method are compared with the results obtained by simulation of the control system. The speed and position control are realized digitally by means of a microcomputer EPAC 68008, a real time operating system, RTOS, and the PEARL language.By directly implementing the recursive algorithm, a simple practical implementation of an adaptive PI-speed controller and PD-position controller is presented.
In this book design and synthesis of microprocessor controlled DC drive system in start-stop working mode is presented. The motor is fed from three - phase thyristor converter without circulating current. The design of position control is based on cascade principle with optimal speed control adjusted by means of modulus optimization method. Synthesis of the system is based on Z-transformation and bi-linear conform copying from Z-plane to W-plane of complex pseudo frequency. Velocity is measured with incremental encoder using M/T method. Software realization of digital speed and position controller is obtained, using direct realization of the recursive algorithm. The results of synthesis, using module and symmetrical optimization method are compared with the results obtained by simulation of the control system. The speed and position control are realized digitally by means of a microcomputer EPAC 68008, a real time operating system, RTOS, and the PEARL language.By directly implementing the recursive algorithm, a simple practical implementation of an adaptive PI-speed controller and PD-position controller is presented.
5
Symbolbild
DC Motors (2016)
DE PB NW RPISBN: 9783639862577 bzw. 3639862570, in Deutsch, Scholars' Press, Taschenbuch, neu, Nachdruck.
Lieferung aus: Deutschland, Versandkostenfrei.
Von Händler/Antiquariat, English-Book-Service Mannheim [1048135], Mannheim, Germany.
This item is printed on demand for shipment within 3 working days.
Von Händler/Antiquariat, English-Book-Service Mannheim [1048135], Mannheim, Germany.
This item is printed on demand for shipment within 3 working days.
8
Symbolbild
INDUCTION MOTORS Dynamics and Vector Control
DE PB NWISBN: 9783639861655 bzw. 3639861655, in Deutsch, Scholar'S Press, Taschenbuch, neu.
Lieferung aus: Deutschland, Versandkostenfrei.
buecher.de GmbH & Co. KG, [1].
Die Beschreibung dieses Angebotes ist von geringer Qualität oder in einer Fremdsprache. Trotzdem anzeigen
buecher.de GmbH & Co. KG, [1].
Die Beschreibung dieses Angebotes ist von geringer Qualität oder in einer Fremdsprache. Trotzdem anzeigen
9
Symbolbild
INDUCTION MOTORS Dynamics and Vector Control (2015)
DE PB NW RPISBN: 9783639861655 bzw. 3639861655, in Deutsch, SPS Dez 2015, Taschenbuch, neu, Nachdruck.
Lieferung aus: Deutschland, Versandkostenfrei.
Von Händler/Antiquariat, AHA-BUCH GmbH [51283250], Einbeck, Germany.
Die Beschreibung dieses Angebotes ist von geringer Qualität oder in einer Fremdsprache. Trotzdem anzeigen
Von Händler/Antiquariat, AHA-BUCH GmbH [51283250], Einbeck, Germany.
Die Beschreibung dieses Angebotes ist von geringer Qualität oder in einer Fremdsprache. Trotzdem anzeigen
10
INDUCTION MOTORS Dynamics and Vector Control
DE NWISBN: 9783639861655 bzw. 3639861655, in Deutsch, VDM Verlag Dr. Müller, Saarbrücken, Deutschland, neu.
Lieferung aus: Deutschland, zzgl. Versandkosten.
Die Beschreibung dieses Angebotes ist von geringer Qualität oder in einer Fremdsprache. Trotzdem anzeigen
Die Beschreibung dieses Angebotes ist von geringer Qualität oder in einer Fremdsprache. Trotzdem anzeigen
Lade…