Through Transmission Laser Spot Welding for PMMA PVC
8 Angebote vergleichen
Bester Preis: € 28,72 (vom 29.11.2019)1
Symbolbild
Through Transmission Laser Spot Welding for PMMA, PVC (Paperback) (2016)
DE PB NW
ISBN: 9783659885846 bzw. 3659885843, in Deutsch, LAP Lambert Academic Publishing, Taschenbuch, neu.
Von Händler/Antiquariat, The Book Depository EURO [60485773], London, United Kingdom.
Language: English . Brand New Book. Through transmission laser spot welding is an important welding technology due to its wide use in the field of welding. A 3D CNC laser machine provided by 1064 nm diode laser was used. Two types of polymers (PMMA and PVC) were welded for different (thicknesses, laser welding time, and specimens clamping pressure) at a laser power of 3.29 W. Fourier Transform Infrared Spectroscopy scanning and transparency for each polymer were done. Tensile strength and microstructure examination for each welding point were examined. It is observed that the best laser welding time for all welded pieces was 5 sec for investigated pieces. The welding process for PMMA groups was accomplished. It is observed that the welding strength increased with increasing laser time and the clamping pressure till (5sec, 5 bar) respectively. For 2.50 mm thick, the best condition for laser welding time and clamping pressure was ( 4 sec, and 5 bar) respectively. While for 6.00 mm thick, the best condition for laser welding time and clamping pressure was ( 5 sec, and 5 bar) respectively. Similar results were obtained for PVC groups at thicknesses (1.00, and 0.70) mm.
Language: English . Brand New Book. Through transmission laser spot welding is an important welding technology due to its wide use in the field of welding. A 3D CNC laser machine provided by 1064 nm diode laser was used. Two types of polymers (PMMA and PVC) were welded for different (thicknesses, laser welding time, and specimens clamping pressure) at a laser power of 3.29 W. Fourier Transform Infrared Spectroscopy scanning and transparency for each polymer were done. Tensile strength and microstructure examination for each welding point were examined. It is observed that the best laser welding time for all welded pieces was 5 sec for investigated pieces. The welding process for PMMA groups was accomplished. It is observed that the welding strength increased with increasing laser time and the clamping pressure till (5sec, 5 bar) respectively. For 2.50 mm thick, the best condition for laser welding time and clamping pressure was ( 4 sec, and 5 bar) respectively. While for 6.00 mm thick, the best condition for laser welding time and clamping pressure was ( 5 sec, and 5 bar) respectively. Similar results were obtained for PVC groups at thicknesses (1.00, and 0.70) mm.
2
Through Transmission Laser Spot Welding for PMMA, PVC
~EN NW AB
ISBN: 9783659885846 bzw. 3659885843, vermutlich in Englisch, neu, Hörbuch.
Lieferung aus: Schweiz, Lieferzeit: 2 Tage, zzgl. Versandkosten.
Through transmission laser spot welding is an important welding technology due to its wide use in the field of welding. A 3D CNC laser machine provided by 1064 nm diode laser was used. Two types of polymers (PMMA and PVC) were welded for different (thicknesses, laser welding time, and specimens clamping pressure) at a laser power of 3.29 W. Fourier Transform Infrared Spectroscopy scanning and transparency for each polymer were done. Tensile strength and microstructure examination for each welding point were examined. It is observed that the best laser welding time for all welded pieces was 5 sec for investigated pieces. The welding process for PMMA groups was accomplished. It is observed that the welding strength increased with increasing laser time and the clamping pressure till (5sec, 5 bar) respectively. For 2.50 mm thick, the best condition for laser welding time and clamping pressure was ( 4 sec, and 5 bar) respectively. While for 6.00 mm thick, the best condition for laser welding time and clamping pressure was ( 5 sec, and 5 bar) respectively. Similar results were obtained for PVC groups at thicknesses (1.00, and 0.70) mm.
Through transmission laser spot welding is an important welding technology due to its wide use in the field of welding. A 3D CNC laser machine provided by 1064 nm diode laser was used. Two types of polymers (PMMA and PVC) were welded for different (thicknesses, laser welding time, and specimens clamping pressure) at a laser power of 3.29 W. Fourier Transform Infrared Spectroscopy scanning and transparency for each polymer were done. Tensile strength and microstructure examination for each welding point were examined. It is observed that the best laser welding time for all welded pieces was 5 sec for investigated pieces. The welding process for PMMA groups was accomplished. It is observed that the welding strength increased with increasing laser time and the clamping pressure till (5sec, 5 bar) respectively. For 2.50 mm thick, the best condition for laser welding time and clamping pressure was ( 4 sec, and 5 bar) respectively. While for 6.00 mm thick, the best condition for laser welding time and clamping pressure was ( 5 sec, and 5 bar) respectively. Similar results were obtained for PVC groups at thicknesses (1.00, and 0.70) mm.
3
Symbolbild
Through Transmission Laser Spot Welding for PMMA, PVC (2016)
DE PB NW
ISBN: 9783659885846 bzw. 3659885843, in Deutsch, LAP Lambert Academic Publishing Nov 2016, Taschenbuch, neu.
Lieferung aus: Deutschland, Versandkostenfrei.
Von Händler/Antiquariat, Agrios-Buch [57449362], Bergisch Gladbach, Germany.
Neuware - Through transmission laser spot welding is an important welding technology due to its wide use in the field of welding. A 3D CNC laser machine provided by 1064 nm diode laser was used. Two types of polymers (PMMA and PVC) were welded for different (thicknesses, laser welding time, and specimens clamping pressure) at a laser power of 3.29 W. Fourier Transform Infrared Spectroscopy scanning and transparency for each polymer were done. Tensile strength and microstructure examination for each welding point were examined. It is observed that the best laser welding time for all welded pieces was 5 sec for investigated pieces. The welding process for PMMA groups was accomplished. It is observed that the welding strength increased with increasing laser time and the clamping pressure till (5sec, 5 bar) respectively. For 2.50 mm thick, the best condition for laser welding time and clamping pressure was ( 4 sec, and 5 bar) respectively. While for 6.00 mm thick, the best condition for laser welding time and clamping pressure was ( 5 sec, and 5 bar) respectively. Similar results were obtained for PVC groups at thicknesses (1.00, and 0.70) mm. 88 pp. Englisch.
Von Händler/Antiquariat, Agrios-Buch [57449362], Bergisch Gladbach, Germany.
Neuware - Through transmission laser spot welding is an important welding technology due to its wide use in the field of welding. A 3D CNC laser machine provided by 1064 nm diode laser was used. Two types of polymers (PMMA and PVC) were welded for different (thicknesses, laser welding time, and specimens clamping pressure) at a laser power of 3.29 W. Fourier Transform Infrared Spectroscopy scanning and transparency for each polymer were done. Tensile strength and microstructure examination for each welding point were examined. It is observed that the best laser welding time for all welded pieces was 5 sec for investigated pieces. The welding process for PMMA groups was accomplished. It is observed that the welding strength increased with increasing laser time and the clamping pressure till (5sec, 5 bar) respectively. For 2.50 mm thick, the best condition for laser welding time and clamping pressure was ( 4 sec, and 5 bar) respectively. While for 6.00 mm thick, the best condition for laser welding time and clamping pressure was ( 5 sec, and 5 bar) respectively. Similar results were obtained for PVC groups at thicknesses (1.00, and 0.70) mm. 88 pp. Englisch.
4
Through Transmission Laser Spot Welding for PMMA, PVC
~EN PB NW
ISBN: 9783659885846 bzw. 3659885843, vermutlich in Englisch, LAP Lambert Academic Publishing, Taschenbuch, neu.
Lieferung aus: Deutschland, Versandkostenfrei.
Through Transmission Laser Spot Welding for PMMA, PVC: Through transmission laser spot welding is an important welding technology due to its wide use in the field of welding. A 3D CNC laser machine provided by 1064 nm diode laser was used. Two types of polymers (PMMA and PVC) were welded for different (thicknesses, laser welding time, and specimens clamping pressure) at a laser power of 3.29 W. Fourier Transform Infrared Spectroscopy scanning and transparency for each polymer were done. Tensile strength and microstructure examination for each welding point were examined. It is observed that the best laser welding time for all welded pieces was 5 sec for investigated pieces. The welding process for PMMA groups was accomplished. It is observed that the welding strength increased with increasing laser time and the clamping pressure till (5sec, 5 bar) respectively. For 2.50 mm thick, the best condition for laser welding time and clamping pressure was ( 4 sec, and 5 bar) respectively. While for 6.00 mm thick, the best condition for laser welding time and clamping pressure was ( 5 sec, and 5 bar) respectively. Similar results were obtained for PVC groups at thicknesses (1.00, and 0.70) mm. Englisch, Taschenbuch.
Through Transmission Laser Spot Welding for PMMA, PVC: Through transmission laser spot welding is an important welding technology due to its wide use in the field of welding. A 3D CNC laser machine provided by 1064 nm diode laser was used. Two types of polymers (PMMA and PVC) were welded for different (thicknesses, laser welding time, and specimens clamping pressure) at a laser power of 3.29 W. Fourier Transform Infrared Spectroscopy scanning and transparency for each polymer were done. Tensile strength and microstructure examination for each welding point were examined. It is observed that the best laser welding time for all welded pieces was 5 sec for investigated pieces. The welding process for PMMA groups was accomplished. It is observed that the welding strength increased with increasing laser time and the clamping pressure till (5sec, 5 bar) respectively. For 2.50 mm thick, the best condition for laser welding time and clamping pressure was ( 4 sec, and 5 bar) respectively. While for 6.00 mm thick, the best condition for laser welding time and clamping pressure was ( 5 sec, and 5 bar) respectively. Similar results were obtained for PVC groups at thicknesses (1.00, and 0.70) mm. Englisch, Taschenbuch.
5
Through Transmission Laser Spot Welding for PMMA, PVC
DE HC NW
ISBN: 9783659885846 bzw. 3659885843, in Deutsch, Lap Lambert Academic Publishing, gebundenes Buch, neu.
Lieferung aus: Deutschland, Versandkostenfrei innerhalb von Deutschland.
Through transmission laser spot welding is an important welding technology due to its wide use in the field of welding. A 3D CNC laser machine provided by 1064 nm diode laser was used. Two types of polymers (PMMA and PVC) were welded for different (thicknesses, laser welding time, and specimens clamping pressure) at a laser power of 3.29 W. Fourier Transform Infrared Spectroscopy scanning and transparency for each polymer were done. Tensile strength and microstructure examination for each Through transmission laser spot welding is an important welding technology due to its wide use in the field of welding. A 3D CNC laser machine provided by 1064 nm diode laser was used. Two types of polymers (PMMA and PVC) were welded for different (thicknesses, laser welding time, and specimens clamping pressure) at a laser power of 3.29 W. Fourier Transform Infrared Spectroscopy scanning and transparency for each polymer were done. Tensile strength and microstructure examination for each welding point were examined. It is observed that the best laser welding time for all welded pieces was 5 sec for investigated pieces. The welding process for PMMA groups was accomplished. It is observed that the welding strength increased with increasing laser time and the clamping pressure till (5sec, 5 bar) respectively. For 2.50 mm thick, the best condition for laser welding time and clamping pressure was ( 4 sec, and 5 bar) respectively. While for 6.00 mm thick, the best condition for laser welding time and clamping pressure was ( 5 sec, and 5 bar) respectively. Similar results were obtained for PVC groups at thicknesses (1.00, and 0.70) mm. Lieferzeit 1-2 Werktage.
Through transmission laser spot welding is an important welding technology due to its wide use in the field of welding. A 3D CNC laser machine provided by 1064 nm diode laser was used. Two types of polymers (PMMA and PVC) were welded for different (thicknesses, laser welding time, and specimens clamping pressure) at a laser power of 3.29 W. Fourier Transform Infrared Spectroscopy scanning and transparency for each polymer were done. Tensile strength and microstructure examination for each Through transmission laser spot welding is an important welding technology due to its wide use in the field of welding. A 3D CNC laser machine provided by 1064 nm diode laser was used. Two types of polymers (PMMA and PVC) were welded for different (thicknesses, laser welding time, and specimens clamping pressure) at a laser power of 3.29 W. Fourier Transform Infrared Spectroscopy scanning and transparency for each polymer were done. Tensile strength and microstructure examination for each welding point were examined. It is observed that the best laser welding time for all welded pieces was 5 sec for investigated pieces. The welding process for PMMA groups was accomplished. It is observed that the welding strength increased with increasing laser time and the clamping pressure till (5sec, 5 bar) respectively. For 2.50 mm thick, the best condition for laser welding time and clamping pressure was ( 4 sec, and 5 bar) respectively. While for 6.00 mm thick, the best condition for laser welding time and clamping pressure was ( 5 sec, and 5 bar) respectively. Similar results were obtained for PVC groups at thicknesses (1.00, and 0.70) mm. Lieferzeit 1-2 Werktage.
6
Symbolbild
Through Transmission Laser Spot Welding for PMMA, PVC
DE PB NW
ISBN: 9783659885846 bzw. 3659885843, in Deutsch, Taschenbuch, neu.
Lieferung aus: Deutschland, Versandkostenfrei.
Von Händler/Antiquariat, English-Book-Service Mannheim [1048135], Mannheim, Germany.
Publisher/Verlag: LAP Lambert Academic Publishing | Through transmission laser spot welding is an important welding technology due to its wide use in the field of welding. A 3D CNC laser machine provided by 1064 nm diode laser was used. Two types of polymers (PMMA and PVC) were welded for different (thicknesses, laser welding time, and specimens clamping pressure) at a laser power of 3.29 W. Fourier Transform Infrared Spectroscopy scanning and transparency for each polymer were done. Tensile strength and microstructure examination for each welding point were examined. It is observed that the best laser welding time for all welded pieces was 5 sec for investigated pieces. The welding process for PMMA groups was accomplished. It is observed that the welding strength increased with increasing laser time and the clamping pressure till (5sec, 5 bar) respectively. For 2.50 mm thick, the best condition for laser welding time and clamping pressure was ( 4 sec, and 5 bar) respectively. While for 6.00 mm thick, the best condition for laser welding time and clamping pressure was ( 5 sec, and 5 bar) respectively. Similar results were obtained for PVC groups at thicknesses (1.00, and 0.70) mm. | Format: Paperback | Language/Sprache: english | 88 pp.
Von Händler/Antiquariat, English-Book-Service Mannheim [1048135], Mannheim, Germany.
Publisher/Verlag: LAP Lambert Academic Publishing | Through transmission laser spot welding is an important welding technology due to its wide use in the field of welding. A 3D CNC laser machine provided by 1064 nm diode laser was used. Two types of polymers (PMMA and PVC) were welded for different (thicknesses, laser welding time, and specimens clamping pressure) at a laser power of 3.29 W. Fourier Transform Infrared Spectroscopy scanning and transparency for each polymer were done. Tensile strength and microstructure examination for each welding point were examined. It is observed that the best laser welding time for all welded pieces was 5 sec for investigated pieces. The welding process for PMMA groups was accomplished. It is observed that the welding strength increased with increasing laser time and the clamping pressure till (5sec, 5 bar) respectively. For 2.50 mm thick, the best condition for laser welding time and clamping pressure was ( 4 sec, and 5 bar) respectively. While for 6.00 mm thick, the best condition for laser welding time and clamping pressure was ( 5 sec, and 5 bar) respectively. Similar results were obtained for PVC groups at thicknesses (1.00, and 0.70) mm. | Format: Paperback | Language/Sprache: english | 88 pp.
8
Through Transmission Laser Spot Welding for PMMA PVC
~EN PB NW
ISBN: 3659885843 bzw. 9783659885846, vermutlich in Englisch, LAP Lambert Academic Publishing, Taschenbuch, neu.
Die Beschreibung dieses Angebotes ist von geringer Qualität oder in einer Fremdsprache. Trotzdem anzeigen
Lade…